topic Re: Replication Solution Manager in Disk Enclosures

Replication Solution Manager

Anubhav Dhingra — Thu, 27 Aug 2009 18:53:06 GMT

Hi,

We have EVA8100 with CV 8.0 and RSM 4.0( both installed on the same Server), with Unlimited Licenses CV and Business Copy. I have successfully configured Hosts (all HP-UX). But i am unable to view the vdisks. It appears the RSM is unable to communicate the SMA as it says connection as BAD. Actually when i installed CV8.0 IP address we used was temp and i changed the IP address. Now, i have re-installed RSM, but not CV. If i uninstall CV , what will happen to licenses installed on them, or i can export and import them.

Please assist on this.

Re: Replication Solution Manager

Víctor Cespón — Fri, 28 Aug 2009 07:12:10 GMT

In the RSM manager, go to Tools - Configuration - Storage access - management servers - EVA management servers - Properties

Fill the correct IP address, user and password

Command View, Bussiness copy and continous access licenses are stored on the EVA. Even if you format the server where Command View is, nothing is lost.

Re: Replication Solution Manager

Anubhav Dhingra — Fri, 28 Aug 2009 21:50:40 GMT

Thanx for your reply, it does not allow me to change the IP.

I would try to uninstall the CV/RSM and re-install them

Re: Replication Solution Manager

Víctor Cespón — Sat, 29 Aug 2009 00:27:24 GMT

Since both Command View and RSM are installed on the same server, no need to modify that, it's localhost.

Make sure username and password are correct

Re: Replication Solution Manager

Anubhav Dhingra — Tue, 01 Sep 2009 05:37:35 GMT

Hi,
Thank you very much for the help. It was the user id/password mismatch between CV and RSM.

It works now perfectly. Checking with business copies.