topic Re: Command View 9.1 grace delay in Disk Enclosures

Command View 9.1 grace delay

jpmartin — Wed, 11 Nov 2009 07:46:30 GMT

Hi all,

what is the grace delay ov CV 9.1 when upgrade frome 6.0.2 ?

I know CV 7 is equal to 180 days, CV 8 to 60 days, but i don't know about CV 9.1

Regards

Jean-Pierre

Re: Command View 9.1 grace delay

Dileep.. — Wed, 11 Nov 2009 08:02:25 GMT

CV 9.1 also has 60days .

Re: Command View 9.1 grace delay

Víctor Cespón — Wed, 11 Nov 2009 08:12:35 GMT

60 days too
But if you had a previous Command View version installed on that server, you may not get the Instant-on 60-day license.

Re: Command View 9.1 grace delay

jpmartin — Wed, 11 Nov 2009 08:19:44 GMT

Yes, when CV 7 or 8 have reached its grace delay, upgrade from one of this version to CV 9 does not give a new grace delay.

But in my case, CV is running 6.0.2, and we have some delay with legacy licences.

Therefore, the question is for upgrade from 6 to CV 9.1

Re: Command View 9.1 grace delay

Mark... — Thu, 12 Nov 2009 12:47:54 GMT

Hi,
Should be 60 days as stated above.
Mark...

Re: Command View 9.1 grace delay

GROSSHENNY — Mon, 16 Nov 2009 20:06:08 GMT

I have just finished the CV upgrade v6.0.2 to v9.1 (uninstal v6.0.2, then instal v9.1), and the grace delay is an old story !!!

Then i uninstal v9.1, followed by installation of v8, and it is the same behavior, no license !!!

Re: Command View 9.1 grace delay

jpmartin — Mon, 23 Nov 2009 07:17:00 GMT

N/A