topic Re: question - RAID Disk in Disk Enclosures

question - RAID Disk

Eli Daniel — Tue, 26 Jan 2010 21:33:08 GMT

good morning
i have the question:

how know the type the RAID in the diks?

the disk asigne is EMC - (power Path)
also command for see?

Re: question - RAID Disk

Michael Steele_2 — Tue, 26 Jan 2010 21:43:06 GMT

symdev list
symdisk -sid SID

Re: question - RAID Disk

Eli Daniel — Tue, 26 Jan 2010 21:48:47 GMT

hi,
SAPL917:/> symdev list
sh: symdev: not found.
SAPL917:/> man symdisk
No manual entry for symdisk.
SAPL917:/>

Re: question - RAID Disk

Suraj K Sankari — Tue, 26 Jan 2010 22:05:34 GMT

HI,
You have to give the full path..
or find the symdev command

find / -name symdev

Suraj

Re: question - RAID Disk

Eli Daniel — Tue, 26 Jan 2010 22:21:17 GMT

SAPL917:/> find / -name symdev
SAPL917:/>

nothing

Re: question - RAID Disk

Michael Steele_2 — Tue, 26 Jan 2010 22:22:40 GMT

/usr/symcli/bin/symdev

Re: question - RAID Disk

Eli Daniel — Tue, 26 Jan 2010 22:30:25 GMT

SAPL917:/usr> pwd
/usr
SAPL917:/usr> cd symcli
sh: symcli: not found.
SAPL917:/usr>

note:
The software SAM (EMC power path)

Re: question - RAID Disk

Michael Steele_2 — Tue, 26 Jan 2010 22:57:56 GMT

symcli stand for symmetrix command line interface. It is the stand EMC disk array package. And it is obviously not installed on this box. Perhaps another? Even windows?

Re: question - RAID Disk

Steven E. Protter — Wed, 27 Jan 2010 00:44:26 GMT

Shalom,

One would need to actually install the EMC utilities prior to using them.

SEP

Re: question - RAID Disk

AVV — Wed, 27 Jan 2010 05:05:33 GMT

Hi,

Looks like EMC utilities to be installed prior to use.

Re: question - RAID Disk

Eli Daniel — Wed, 27 Jan 2010 14:15:45 GMT

SAPL917:/> powermt display dev=all
Symmetrix ID=000290100942
not see the type RAID

Logical device ID=26D0
state=alive; policy=SymmOpt; priority=0; queued-IOs=0
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
0 1/0/4/1/0/4/0.19.100.0.0.0.5 c0t0d5 FA 7bB active alive 0 0
2 0/0/4/1/0/4/0.20.100.0.0.0.5 c2t0d5 FA 8bB active alive 0 0

Re: question - RAID Disk

Michael Steele_2 — Wed, 27 Jan 2010 17:17:00 GMT

Hi

Here's the man page for powermt. Note that this is a HBA command that reports on HBA load balancing. It has nothing to do with configuring disk arrarys.

http://www.eygle.com/unix/Man.Page.Of.Powermt.htm

Re: question - RAID Disk

Eli Daniel — Tue, 02 Feb 2010 13:39:21 GMT

sorry,
no command to view the disk Raid?

Re: question - RAID Disk

Eli Daniel — Thu, 04 Feb 2010 13:35:14 GMT

Thanks