msa 1000 active active, lun missing..?

garibaldi_1 — Thu, 10 Jun 2010 16:53:54 GMT

dear all,
I've had a MSA 1000 with firmware 7 (A/A) stacked with MSA30. LUNs diviced into 4, first one, 13 disk RAID 5 from MSA 1000 with one hot spare.
second, 5 disk RAID 5, one global hot spare at MSA30.
Third, 5 disk RAID 5, one global hot spare at MSA30.
Fourth, 3 disk, RAID 5, one global hot spare at MSA30.

Anyhow, I plug an ethernet cable to EMU module in the back of MSA 30. Then, suddenly, all of disk in MSA 30 turn red (like failed disk).

To counter this problem, i've unplug and plug again the EMU module. All disk became green again (thanks god :) )

Somehow, a disk failed in the second LUN failed. This LUN belong to the ESX 3.5 server.
All VM in the LUN is not responding. The ESX server has lost connectivity to this LUN.

my questions are..

1. Why the hot spare disk not active, the disk stay in standby mode. Are there any condition that hot spare disk failed to cover the failed disk in disk group?

2. Now, the second LUN is missing (cannot access LUN). From ACU, (ACU v. 8.0.14.0 and MSA1000 firmware 7.00), the LUN status is #271, array controller has a failed logical drive). Somehow, RAID 5 has failed. When I try to enable the failed logical disk, I cannot save the changes from ACU. Any clues to recover this LUN ?

Need advice...

Thanks in advance..

Re: msa 1000 active active, lun missing..?

Uwe Zessin — Thu, 10 Jun 2010 17:47:32 GMT

I don't know why it does not work with the ACU, but there is also a CLI interface (both, host-based and via the controller's serial port). At least the serial port understands the command:

ACCEPT UNIT #

-----
> I plug an ethernet cable to EMU module
> in the back of MSA 30

Very bad idea! That was an interface to an LCD display when the unit was mounted in a floor-stand frame.

Re: msa 1000 active active, lun missing..?

garibaldi_1 — Tue, 22 Jun 2010 05:40:35 GMT

restarting MSA 1000 solve the problems..

thanks

topic Re: msa 1000 active active, lun missing..? in Disk Enclosures

msa 1000 active active, lun missing..?

Re: msa 1000 active active, lun missing..?

Re: msa 1000 active active, lun missing..?