https://community.hpe.com/t5/disk-enclosures/adding-d2700-to-p2000-g3/m-p/5250571#M44198 On further reading of the documentation it is apparent that the D2700 should be added to the P2000 G3 in a powered off state rather than as a hot add. Mon, 13 Sep 2010 06:08:41 GMT Mike Povall 2010-09-13T06:08:41Z https://community.hpe.com/t5/disk-enclosures/adding-d2700-to-p2000-g3/m-p/5250570#M44197 I have a P2000 G3 in production and need to add a D2700 shelf to the existing environment. Is it possible to do this as a hot add or will the P2000 G3 need a power cycle to recognise the D2700 and its disks?<BR /><BR />Regards, Mike. Fri, 06 Aug 2010 07:19:35 GMT https://community.hpe.com/t5/disk-enclosures/adding-d2700-to-p2000-g3/m-p/5250570#M44197 Mike Povall 2010-08-06T07:19:35Z https://community.hpe.com/t5/disk-enclosures/adding-d2700-to-p2000-g3/m-p/5250571#M44198 On further reading of the documentation it is apparent that the D2700 should be added to the P2000 G3 in a powered off state rather than as a hot add. Mon, 13 Sep 2010 06:08:41 GMT https://community.hpe.com/t5/disk-enclosures/adding-d2700-to-p2000-g3/m-p/5250571#M44198 Mike Povall 2010-09-13T06:08:41Z