https://community.hpe.com/t5/disk-enclosures/va7410-controller-link-down/m-p/5255222#M44264 The error is erroneous in my case. Mon, 13 Sep 2010 18:51:45 GMT Nick Lewers 2010-09-13T18:51:45Z https://community.hpe.com/t5/disk-enclosures/va7410-controller-link-down/m-p/5255221#M44263 HPUX 11i. We lost power for a very long time the other day, and when the server came back up I see the following error in the syslog:<BR /><BR />Sep 13 02:53:24 rico syslog: CVSDM; INFORMATION Event Code=400; Description=542:<BR />BACKEND_LINK_DOWN_EH A disk interface has been down for longer than the time all<BR />owed for normal recovery. Array function will continue without use of this chan<BR />nel. This can be caused by a bad connection to disks (internal orexternal), or<BR />by a failind disk or controller.; Ckpt 0x16016d: 0x00000002 ctlr 1 loop 1; backe<BR />nd: Link Inactive, abort init; enclosureId/slot/component/subcomponent : 0x00/0x<BR />01/0x81/0xff; controller tick : 28089740914699; serialNum/moduleId/<BR />processId : 00PR02146122/0x16/0xffffffff; ; Hardware Address=1/0/8/1/0.8.0.255.6<BR />.14.0; FRU Location=M/C2.J2; Vendor ID=HP; Model ID=A6218A; Product S/N=00SG230J<BR />0315; Latest information on this event at <A href="http://docs.hp.com/hpux/content/hardwa" target="_blank">http://docs.hp.com/hpux/content/hardwa</A><BR />re/ems/RemoteMonitor.htm#400<BR /><BR />I have attached the armdisp output, that controller comes back with a good status just that it is not online. Is there a safe way to clear this error while the array is up to get the link back up? Mon, 13 Sep 2010 16:21:03 GMT https://community.hpe.com/t5/disk-enclosures/va7410-controller-link-down/m-p/5255221#M44263 Nick Lewers 2010-09-13T16:21:03Z https://community.hpe.com/t5/disk-enclosures/va7410-controller-link-down/m-p/5255222#M44264 The error is erroneous in my case. Mon, 13 Sep 2010 18:51:45 GMT https://community.hpe.com/t5/disk-enclosures/va7410-controller-link-down/m-p/5255222#M44264 Nick Lewers 2010-09-13T18:51:45Z