topic Re: HP VA7100 CLI reference guide in Disk Enclosures

HP VA7100 CLI reference guide

Patrick Terlisten — Thu, 05 May 2011 16:24:03 GMT

Hello,

I'm searching for a CLI reference for the HP VA storage arrays? Is there any PDF?

Regards,
Patrick

Re: HP VA7100 CLI reference guide

Torsten. — Thu, 05 May 2011 16:34:28 GMT

I don't remember if there was any.

I normally used the VFP CLI for creating LUN0 and very basic troubleshooting only.
Better to use command view.

You can get basic help like this:

Ready > help

For help with a command, use the -? option (e.g. vfpsetup -?).

setup Performs Virtual Front Panel configuration.
dsp Displays subsystem status.
cfg Performs subsystem configuration.
mgr Performs subsystem management operations.
fmt Performs a subsystem format.
rbld Performs rebuild operations.
recover Performs NVRAM recovery operations.
secure Performs LUN Security operations.
log Displays event logs

Ready > dsp -?

Displays subsystem status.

Usage:

dsp [-c ] [-d ] [-e ] [-f]

[-L ] [-s] [-?]

-c: Displays controller information.

-d: Displays disk information.

-e: Displays enclosure information.

-f: Displays a listing of FRUs in the array.

-L: Displays LUN information.

-s: Displays subsystem status, warnings, and

subsystem parameter information for the array.

-?: Displays help.

Or are you looking for command view cli commands? They are all in the CV SDM user guide.

Re: HP VA7100 CLI reference guide

Patrick Terlisten — Thu, 05 May 2011 16:55:43 GMT

Hello,

my fault, I searched for a CLI guide, but the arm-commands were in the CV SDM guide. Thanks for that hint!

http://www.dectrader.com/docs/set3/c00300018.pdf

Regards,
Patrick

Re: HP VA7100 CLI reference guide

Torsten. — Thu, 05 May 2011 16:56:06 GMT

Found something deep inside the directory tree ... see attachment.

Re: HP VA7100 CLI reference guide

Torsten. — Thu, 05 May 2011 16:58:53 GMT

Ok, you searched for CV SDM arm commands.

If unsure about usage, try cvui. The command line used for the selected command is printed at the bottom of the screen.