topic EVA6400 Cabling in Disk Enclosures

EVA6400 Cabling

Dhananjaya Amarakoon — Sun, 14 Aug 2011 21:10:41 GMT

Hi Friends

I have cabled EVA6400 which contains 3 disk enclosures. All three enclosures are mounted top of two controllers. Please find attached jpg file. When I power up ID numbers assign as 1 , 3 and 11 from disk enc 1 to 3.
Did I make any mistake when doing cabling?
How can I reset that numbers and make them proper order such as 1,2,3

Regards
Dhananjaya

Re: EVA6400 Cabling

Uwe Zessin — Thu, 18 Aug 2011 06:55:41 GMT

This process is not published outside of HP.

And from what I have heard, it must be done before the system is initialized.

Re: EVA6400 Cabling

hvhari — Fri, 19 Aug 2011 12:52:28 GMT

Cabling guide for EVA 6400/8400 is available at http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02248317/c02248317.pdf

Page11 describes EVA6400 2C3D configuration. You may verify your cabling with this.