https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-password/m-p/4056074#M45503 If you installed ACU 2.0, then you must use an existing login and password on your existing system. If you are using linux, then a default login will be root and the password will be your linux root password. That will get you into the ACU with "Admin" rights. Mon, 10 Sep 2007 19:28:11 GMT Edmundo Chow 2007-09-10T19:28:11Z https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-password/m-p/4056073#M45502 I started at a new company and no one has the administrator password for the hp Array Configuration Utility. Several searches on Google and HP's site have not uncovered a default password.<BR /><BR />Does anyone know what the default password is for that management console utility? I just hope whoever set it up left it at the default. Fri, 17 Aug 2007 09:39:47 GMT https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-password/m-p/4056073#M45502 regbit 2007-08-17T09:39:47Z https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-password/m-p/4056074#M45503 If you installed ACU 2.0, then you must use an existing login and password on your existing system. If you are using linux, then a default login will be root and the password will be your linux root password. That will get you into the ACU with "Admin" rights. Mon, 10 Sep 2007 19:28:11 GMT https://community.hpe.com/t5/disk-enclosures/hp-array-configuration-utility-password/m-p/4056074#M45503 Edmundo Chow 2007-09-10T19:28:11Z