topic Re: HP P2000 MSA Performance Tool - Remove a discovered P2000? in Disk Enclosures

HP P2000 MSA Performance Tool - Remove a discovered P2000?

MarkusHass — Fri, 04 May 2012 08:33:39 GMT

Hi,

i have changed the IP address of a P2000. Now the Performance Tool is unable to find this P2000. But i can't change the address in the Tool or even rediscover it, as the name of the P2000 has not changed and because of that it doesn't change anything.

I even reinstalled the MSA tool but the config files must be stored on a different location as the P2000s are still there.

Is there a way to remove a discovered P2000? I don't see it...

Best regards,

Markus Hass

Re: HP P2000 MSA Performance Tool - Remove a discovered P2000?

SUBHAJIT KHANBARMAN_1 — Fri, 04 May 2012 15:50:42 GMT

Try to uninstall the Performance tool again and follow the instructions as per below,

Issue: After uninstalling the tool through Control Panel > Add or Remove Programs, Performance Tool tasks are still active in the Windows Task Scheduler.
Workaround: Use Windows Task Scheduler to delete the tasks. The task name will be in the following format: get_<aray_name> ~~ <serial_number> ~~ <date> ~~ <task_id>

You can also try to remove the same from registry.

Re: HP P2000 MSA Performance Tool - Remove a discovered P2000?

sujja — Wed, 09 May 2012 09:58:51 GMT

Did you check the firewall port?

can you ping and telnet?

Re: HP P2000 MSA Performance Tool - Remove a discovered P2000?

MarkusHass — Tue, 29 May 2012 09:57:53 GMT

Hi,

well it is not a problem that i can't reach anything or any other network related problem.

Is it possible to delete a previously discovered system from the P2000 MSA Performance tool?

Regards,

Markus Hass