P2000 MSA

Rich Slan — Mon, 24 Sep 2012 13:34:44 GMT

I'm having an issue with a P2000 MSA iSCSI. I'm not sure if it's a G3 or an earlier one. However, the issue is the unit is in our test lab. We've recently acquired it, however, we also know nothing about the configuration. LUNs, vdisks, IP addresses, usernames and passwords, etc.

I want to reset it to the factory defaults, however, the only method I see is to gain access via the CLI. Of course, we don't have the cable that shipped, and I"m not 100% sure the admin password hasn't been changed.

So, my question is: "Is there any way to reset the unit to factory defaults without accessing the CLI? Can I use the service port/pushbutton on back? I'm not the least bit worried about losing data; it exists in our lab environment only, nothing production on it.

Appreciate any help I can get.. I haven't had a lot of luck looking through the documentaiton.

topic P2000 MSA in Disk Enclosures

P2000 MSA