https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5875509#M45893 <P>Thanks for your recommendation! I will have a try and post the result.</P> Thu, 22 Nov 2012 09:39:49 GMT kworkshop 2012-11-22T09:39:49Z https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5865081#M45874 <P>Hello, I have a DL380G7 with new purchase P812/1G SAS controller(487204-B21) and D2700 enclosure with 7.5TB bundle(AW525A), would like to know the best practice of cabling between them, can it be a full mesh cabling to achieve ports or cables failure? I had search around the user guide of D2700 but the nearly scenario is only talking about one controller with two enclosures...</P><P>&nbsp;</P><P>Thanks in advance!</P><P>&nbsp;</P><P>Chris</P> Tue, 13 Nov 2012 08:49:52 GMT https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5865081#M45874 kworkshop 2012-11-13T08:49:52Z https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5868759#M45879 <P>Your P812 should have 2 ports, which you can connect to the input ports on each module on the back of your D2700. This will give you redundant paths and i think will improve performance as long as both controller modules are alive.</P> Fri, 16 Nov 2012 15:34:30 GMT https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5868759#M45879 Mike Texter 2012-11-16T15:34:30Z https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5875509#M45893 <P>Thanks for your recommendation! I will have a try and post the result.</P> Thu, 22 Nov 2012 09:39:49 GMT https://community.hpe.com/t5/disk-enclosures/what-is-the-best-performance-cabling-between-the-p812-and-d2700/m-p/5875509#M45893 kworkshop 2012-11-22T09:39:49Z