How does work Continues Access

htovar — Tue, 22 Jan 2013 22:45:33 GMT

Recently we implemented a replication process with the software "Continues Access". When we started the process, the access to the data base were heavily impacted. Therefore, we decided to replicate only at night, with fewer users.

However, when we stopped the process, at daytime, begins to fill the replication log, with the information of the day.

The information in the replication log, is updated in the night, when we restarted the replica; but not in time for fully discharged.

Finally, the replication log is full and restarts process.

We repeat the process and the result was the same, so we believe that we are in a loop.

My question is: How does this software work?.

Re: How does work Continues Access

Johan Guldmyr — Wed, 23 Jan 2013 12:17:27 GMT

Good start for reading material is the "HP P6000 Continuous Access Implementation Guide" : http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02838340/c02838340.pdf

If you stop replication - eventually the log gets full.

When replication is started again it will have to do a full copy (copy all data from source to destination).

topic How does work Continues Access in Disk Enclosures

How does work Continues Access

Re: How does work Continues Access