DS2600 Disk issue

Alexra — Tue, 18 Jun 2013 02:21:53 GMT

Dear all,

i´ve install an brand new D2600 disk storage withe 2 x enclosure with 19 disk connectet in dual domain mode.

Configuration:

P421i Raif 6 with HS 1 HS + enclosure

I got the folloeing errormessage in in eveltlog system:

A drive failure notification has been received for the SATA physical drive located in bay 1. This drive can be found in box 1 which is connected to port 2E of the array controller P421 located in server slot 2. The failure reason received from the HP Smart Array firmware is: MISSING_IN_TOPOLOGY.

The message appears for all 12 disk in enclosure 1.

Did anybody has this message befor?

regards,

Alexander

P.S. This thread has been moved from Disk > DS2600 Disk issue to Disk Array. -HP forum moderator

Re: DS2600 Disk issue

pancuz — Sun, 23 Jun 2013 07:37:25 GMT

D2600 jbod is LFF with 12 disks. Since, you are mentioning 19 disks, I am assuming you are cascading two jbods.And i believe the problem is with cascading. Can you please check cabling, if you have followed recommended cabling steps while cascading two or more jbods? At least " MISSING_IN_TOPOLOGY" message points towards that.

topic Re: DS2600 Disk issue in Disk Enclosures

DS2600 Disk issue

Re: DS2600 Disk issue