topic Re: HP Multipath on ESXi 5.1 in Disk Enclosures

HP Multipath on ESXi 5.1

pratik_patel — Mon, 15 Jul 2013 03:11:33 GMT

Hi,

Can you please let me know how to configure and enable Multipath on ESXi 5.1?

We are using MSA2000.

Controller Version Details
---------------------
Storage Controller CPU Type: Turion MT32 1800MHz
Storage Controller Code Version: M113R11
Memory Controller FPGA Code Version: F300R22
Storage Controller Loader Code Version: 19.009
Management Controller Code Version: W441R48
Management Controller Loader Code Version: 12.015
Expander Controller Code Version: 1117
CPLD Code Version: 8
Hardware Version: 56

Regards,

Pratik

P.S. This thread has been moved from Storage Area Networks (SAN) >Storage Area Networks (SAN) (Enterprise) > to Disk Array. -HP Forum Moderator

Re: HP Multipath on ESXi 5.1

nightwatchman — Wed, 17 Jul 2013 14:36:58 GMT

Hi Pratik,

Is the Lun seen in ESXi ? If yes, you have right click on the specific lun and click on Manage Paths.

There are three paths in Vmware Esx

1. Fixed

2. Round Robin

3. Most Recently Used

Vmware has a hardware specific path selection policy. For HP MSA P2000 ( Assuming it to be FC) Please check this link for Best Practice Guide.

http://www.vmware.com/resources/compatibility/detail.php?deviceCategory=san&productid=9570&releaseid=171&deviceCategory=san&partner=41&releases=171&keyword=P2000&isSVA=1&page=1&display_interval=10&sortColumn=Partner&sortOrder=Asc

Note: Please reply and let us know whether this is fixed.