topic Re: HP MSA1000 GUI in Disk Enclosures

HP MSA1000 GUI

VigneshKadirvel — Thu, 12 Sep 2013 23:56:44 GMT

Hello Admins,

I am new to HP storage, in my enviorment i got an request for to extend the existing lun in HP MSA1000.

Which is DAS. so i tried login from server end but i am not sure where i need to go to get into that array.

Can you guys help me where should i approach from server end and how do i extend the existing lun through GUI.

Thanks in Advance

Regards,

Vignesh Kadivel

Re: HP MSA1000 GUI

StorageMike — Fri, 13 Sep 2013 08:21:47 GMT

Hi Vignesh

As long as the Proliant Support pack is installed you should be able to configure the MS1000 via the array configuration utility (ACU) in the same way you would configure an internal raid set.

Thanks

Re: HP MSA1000 GUI

StorageMike — Fri, 13 Sep 2013 08:23:42 GMT

Sorry meant to include the following link

http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=377751&ac.admitted=1379060542529.876444892.492883150

Re: HP MSA1000 GUI

VigneshKadirvel — Fri, 13 Sep 2013 14:52:09 GMT

what is the default faul tolerance level for HP MSA1000 while creating logical drive also what is the stripe size?

Re: HP MSA1000 GUI

Torsten. — Tue, 17 Sep 2013 05:49:24 GMT

It is up to you if you want to use RAID 1 or 5.