topic Re: P2000 G3 SAS Multipath problem in Disk Enclosures

P2000 G3 SAS Multipath problem

madmax81 — Mon, 30 Sep 2013 07:01:05 GMT

Hi!

I have a P2000 G3 SAS storage (2 controller configuration)with two DL 360 G8 servers (Set up with Windows Server 2012 Datacenter). The server's connect to the storage via HP H221 HBA's and the volumes of the storage are shownn correctly on each server. The problem is, that as soon as I configure Multipathing with the command (mpclaim -n -i -a) one of the servers shows a bluescreen when executing the command or on the next restart. The error code is page_fault_in_nonpaged_area(lsi_sas2-sys). I already did a firmware update of the H221 and the P2000 controllers but it didn't help.

Can anybody help me?

Thank's in advance

Markus

Re: P2000 G3 SAS Multipath problem

StorageMike — Mon, 30 Sep 2013 08:34:07 GMT

Hi Markus

Have you installed the following hotfix

http://support.microsoft.com/kb/2821052

Thanks

Michael

Re: P2000 G3 SAS Multipath problem

madmax81 — Mon, 30 Sep 2013 13:35:06 GMT

Hi!

I was able to fix the problem. I disabled the H221 controller in the bios and was then again able to boot the server. Then I installed all the Microsoft Updates and after installing an Optional Update the error was gone.

Regards

markus