topic Re: EVAPerf With CV EVA in Disk Enclosures

EVAPerf With CV EVA

david59 — Tue, 31 Dec 2013 08:28:35 GMT

Hello,

I Need to monitor an EVA 6400. (performance issue)

I want to collect metrics with EVAPerf.

I want to konw if EVAPerf is still installed with the latest version of CV EVA (10.x) ?

If not, how to install the software?

Thanks.

Best Regards

David

Torsten. — Tue, 31 Dec 2013 08:37:35 GMT

HP P6000 Performance Data Collector (formerly evaperf) is part of the CV 10.3 installation.

Emad Omar — Tue, 31 Dec 2013 08:40:55 GMT

You can use below command to monitor the EVA performance:

evaperf all -csv -ts2 -cont 180 -dur 84600 -sz “EVA_ALL” > Myevalog.csv

Hope this help you . . . .

david59 — Tue, 31 Dec 2013 08:51:05 GMT

Thanks

But can i still use the commands line through a console window (ex : evaperf all -cont 10 –ts2 –dur 3600 –csv > CA.csv )

I prefer to use the command line compared to GUI.

Best regards.

Torsten. — Tue, 31 Dec 2013 08:57:29 GMT

Yes. The CV user guide has the details.