topic Re: SA P400 Array Accelerator Batteries Failed to Charge in Disk Enclosures

SA P400 Array Accelerator Batteries Failed to Charge

PAUL FARINELLI — Thu, 03 Apr 2014 01:58:40 GMT

Is it safe to proceed after getting these messages when booting HP-UX 11iV3 on an rx6600?

HP Smart Array P400 Controller (version 5.20) 1 Logical Drive

1794-Drive Array - Array Accelerator Battery Charge Low

Array Accelerator Posted-Write Cache is temporarily disabled.

Array Accelerator batteries have failed to charge and should be replaced

P.S. This thread has been moevd from Disk to Disk Array. - Hp forum Moderator

Re: SA P400 Array Accelerator Batteries Failed to Charge

marsh_1 — Tue, 16 Dec 2008 17:02:24 GMT

paul,

have a look here at number 1794 , i'd get them replaced asap :-

http://docs.hp.com/en/J6369-90072/apcs01.html

good luck

Re: SA P400 Array Accelerator Batteries Failed to Charge

cnb — Tue, 16 Dec 2008 19:14:03 GMT

Hi Paul,

Yes, but there are operational cautions that you need to be aware of until they are replaced.

http://docs.hp.com/en/J6369-90072/ch01s03.html

http://h18004.www1.hp.com/products/quickspecs/12400_div/12400_div.pdf

405835-001 512MB battery backed write cache (BBWC) memory board - 72-bit, DDR - For Smart Array P400 controller

-or-

405836-001 256MB battery backed write cache (BBWC) memory board - 40-bit, DDR - For Smart Array P400 controller

HTH,