https://community.hpe.com/t5/disk-enclosures/msa60-storageworks-array/m-p/4633808#M47320 <P>Dear all,<BR /><BR />I have a new MSA60 to be directly attached.<BR />my question is, after i poweron this MSA60 should the disks (SATA 1 Terra )configured into it give a green light or no ?<BR /><BR />Thanks &amp; regards</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved&nbsp;from Disk to Disk arrays. - Hp Forum Moderator</P> Wed, 09 Apr 2014 01:35:33 GMT joe youssef 2014-04-09T01:35:33Z https://community.hpe.com/t5/disk-enclosures/msa60-storageworks-array/m-p/4633808#M47320 <P>Dear all,<BR /><BR />I have a new MSA60 to be directly attached.<BR />my question is, after i poweron this MSA60 should the disks (SATA 1 Terra )configured into it give a green light or no ?<BR /><BR />Thanks &amp; regards</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved&nbsp;from Disk to Disk arrays. - Hp Forum Moderator</P> Wed, 09 Apr 2014 01:35:33 GMT https://community.hpe.com/t5/disk-enclosures/msa60-storageworks-array/m-p/4633808#M47320 joe youssef 2014-04-09T01:35:33Z https://community.hpe.com/t5/disk-enclosures/msa60-storageworks-array/m-p/4633809#M47321 Hi Joe, <BR /><BR />The drive LED will only turn green once you have configured an array on the MSA.<BR /><BR />If both LEDs are off then the drive is offline, a spare, or not configured as part of an<BR />array. Mon, 16 Aug 2010 12:05:17 GMT https://community.hpe.com/t5/disk-enclosures/msa60-storageworks-array/m-p/4633809#M47321 Ajohansen 2010-08-16T12:05:17Z