https://community.hpe.com/t5/disk-enclosures/p2000-controller-and-performance/m-p/6475524#M47377 <P>On a P2000 FC G3 MSA, vdisks assigned to controller B were showing very high io times every 10 sec. On re-assigning to controller A, the io times returned to normal.</P> <P>&nbsp;</P> <P>What could be the issue? Both controllers were at the same firmware revision.</P> <P>&nbsp;</P> <P>Thanks</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Storage&gt;General to Disk arrays. -HP Forum Moderator</P> Thu, 15 May 2014 01:38:53 GMT rw_pc 2014-05-15T01:38:53Z https://community.hpe.com/t5/disk-enclosures/p2000-controller-and-performance/m-p/6475524#M47377 <P>On a P2000 FC G3 MSA, vdisks assigned to controller B were showing very high io times every 10 sec. On re-assigning to controller A, the io times returned to normal.</P> <P>&nbsp;</P> <P>What could be the issue? Both controllers were at the same firmware revision.</P> <P>&nbsp;</P> <P>Thanks</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>P.S. This thread has been moved from Storage&gt;General to Disk arrays. -HP Forum Moderator</P> Thu, 15 May 2014 01:38:53 GMT https://community.hpe.com/t5/disk-enclosures/p2000-controller-and-performance/m-p/6475524#M47377 rw_pc 2014-05-15T01:38:53Z