Disk Enclosures의 주제 Re: VA problem error

VA problem error

bitou — Fri, 06 Mar 2015 07:13:04 GMT

Hi,
I have a message error when i try to add a new HD in the enclosure.
I have received an error on the command view "WARNING: The configuration of the subsystem is such that one or more drives has only a single path of access to it"
any help to solve this issue.

P.S. This thread has been moved from General to Disk array. - Hp Forum Moderator

Re: VA problem error

Torsten. — Mon, 23 May 2011 17:14:33 GMT

>> "WARNING: The configuration of the subsystem is such that one or more drives has only a single path of access to it"

You should start with a "armdsp -a " and investigate who is the culprit ...

Re: VA problem error

hvhari — Wed, 25 May 2011 02:29:25 GMT

hi , were you able to get the output requested Torsten in previous post?

Re: VA problem error

bitou — Wed, 25 May 2011 04:12:27 GMT

when i execute armdsp -a alias command, i have received:

ARRAY INFORMATION

Array Status:_________________________Warning
Firmware Revision:____________________38370HP17P0829021443
Product Revision:_____________________HP17
Last Event Log Entry for Page 1:______56649
LUN SETTINGS

LUN Creation Limit:___________________1024
Maximum LUN Creation Limit:___________1024
Migrating Write Destination:__________False

SCRUB SETTINGS

Scrub Restart Period:_________________7190 minutes
Scrub State:__________________________Stopped, host activity detected

OPERATIONS IN PROGRESS
.
.
.
.
WARNINGS

WARNING: The configuration of the subsystem is such that one or more drives has only a single path of access to it.

Re: VA problem error

hvhari — Wed, 25 May 2011 09:43:58 GMT

need to look in the complete log to understand the origin of this warning. could you attach it to the post? (error could be anywhere on disks, controller or JBODs.)

Re: VA problem error

Torsten. — Wed, 25 May 2011 17:37:27 GMT

The full armdsp -a alias would be more helpful.

add

armdsp -t alias

Re: VA problem error

PDP-Fan — Fri, 07 Oct 2011 08:52:00 GMT

There are single path and dual path (DP) drives.... do you have the right one?

Re: VA problem error

Torsten. — Fri, 07 Oct 2011 11:10:26 GMT

# armdsp -t <alias>

will help!