https://community.hpe.com/t5/disk-enclosures/oracle-with-what-array-controller/m-p/2719041#M4778 I have several Compaq DL380 servers with Integrated Array controllers installed. We are running Oracle on these servers and having performance issues. How can I tell if it is the Array Controller causing the problem? What Array Controller should I be using with an Oracle installation? Tue, 07 May 2002 23:00:00 GMT Ayman Altounji 2002-05-07T23:00:00Z https://community.hpe.com/t5/disk-enclosures/oracle-with-what-array-controller/m-p/2719041#M4778 I have several Compaq DL380 servers with Integrated Array controllers installed. We are running Oracle on these servers and having performance issues. How can I tell if it is the Array Controller causing the problem? What Array Controller should I be using with an Oracle installation? Tue, 07 May 2002 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/oracle-with-what-array-controller/m-p/2719041#M4778 Ayman Altounji 2002-05-07T23:00:00Z https://community.hpe.com/t5/disk-enclosures/oracle-with-what-array-controller/m-p/2719042#M4779 Hi <BR />If possible , reboor serveur with Smart Start and run ADU : that will give you an idea if there's anything wrong with the ROC . <BR />Or else also check firmware levels of drives and controller. <BR /> <BR />Are you having problems installing or running Oracle ? <BR /> <BR />The ingrated Controller doesn't have a lot of cache compared to a SA5300 ( for example ) . That could be a cause of poor performance Wed, 08 May 2002 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/oracle-with-what-array-controller/m-p/2719042#M4779 Ayman Altounji 2002-05-08T23:00:00Z