topic Re: Storage Works Command View v1.07 in Disk Enclosures

Storage Works Command View v1.07

tom nellis — Fri, 13 Mar 2015 03:37:37 GMT

Hello Everyone,

I have a server that's been on the shelf for a few years. Command View is installed and I would like to move it to a production server.

That's the problem, No one knows where the install disks or licensing info is. We believe it was regestered. Going to use this software on a VA 7100.

This software may be outdated, but no one here has any idea.

Any help would be appreciated.

Thanks,

Tom

P.S. This thread has been moved from General to Disk Array.- Hp Forum Moderator

Re: Storage Works Command View v1.07

Torsten. — Mon, 06 Feb 2006 10:25:40 GMT

Hi Tom,

go to the software & driver downloads section on www.hp.com and look for "HP StorageWorks Command View SDM Software". Version 1.09.01 is the latest. You need no licence for this software - it's free now.

Re: Storage Works Command View v1.07

Joshua Scott — Mon, 06 Feb 2006 10:28:04 GMT

You can download commandview here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=321693&prodTypeId=12169&prodSeriesId=33737&swLang=13&taskId=135&swEnvOID=7

you can find this by going:

http://www.hp.com/

click Software & Driver Downloads

select Download drivers and software (and firmware)

type VA7100 in the box, and click the arrow to continue.

click HP StorageWorks VA7100 (1024MB mc per contr crd)

click HP-UX 11.x

Josh

Re: Storage Works Command View v1.07

Arend Lensen — Fri, 10 Feb 2006 12:04:49 GMT

Just fyi.
1.09.02 is just released but there's not much changed.

Re: Storage Works Command View v1.07

tom nellis — Fri, 10 Feb 2006 12:11:16 GMT

Thanks everyone,
I have it running now.
Going to move it to another Server.