https://community.hpe.com/t5/disk-enclosures/d2700-and-p411-controller/m-p/6908858#M48527 <P>I seem to have several threads on this issue, but I have yet to get an answer.&nbsp;</P><P>I have one d2700 direct connected via SAS to a P411 controller inside a DL580 G8.. &nbsp;ORCA sees and attempts initialize the disks through the P411, but it doesn't detect the disks. Going through Post, my DL580 sees the controller, and I get message 289-Important. so&nbsp;the ACU sees the controller, but not the disks again. &nbsp;I have updated the firmware, and changed the slot and cables, but still nothing. &nbsp;&nbsp;</P><P>What am I missing? &nbsp;</P><P>HP has no answers either.</P> Wed, 19 Oct 2016 04:49:25 GMT cnorton39 2016-10-19T04:49:25Z https://community.hpe.com/t5/disk-enclosures/d2700-and-p411-controller/m-p/6908858#M48527 <P>I seem to have several threads on this issue, but I have yet to get an answer.&nbsp;</P><P>I have one d2700 direct connected via SAS to a P411 controller inside a DL580 G8.. &nbsp;ORCA sees and attempts initialize the disks through the P411, but it doesn't detect the disks. Going through Post, my DL580 sees the controller, and I get message 289-Important. so&nbsp;the ACU sees the controller, but not the disks again. &nbsp;I have updated the firmware, and changed the slot and cables, but still nothing. &nbsp;&nbsp;</P><P>What am I missing? &nbsp;</P><P>HP has no answers either.</P> Wed, 19 Oct 2016 04:49:25 GMT https://community.hpe.com/t5/disk-enclosures/d2700-and-p411-controller/m-p/6908858#M48527 cnorton39 2016-10-19T04:49:25Z