https://community.hpe.com/t5/disk-enclosures/d3610-controller-redundancy/m-p/7033312#M48906 <P>All,</P><P>I've got a single D3610 connected to a host via a single SAS cable on DP-1 on Controller 1. Is the&nbsp; a way to connect Controller 2 to my host so that if Controller 1 failed, Controller 2 would take over? Everything I've seen on HPE's docs talks about redudnant paths when using multiple enclosures, but since I have the one, it's not really helping me. Any help or feedback would be appreciated. Thanks!</P> Fri, 01 Feb 2019 21:56:03 GMT rbycek 2019-02-01T21:56:03Z https://community.hpe.com/t5/disk-enclosures/d3610-controller-redundancy/m-p/7033312#M48906 <P>All,</P><P>I've got a single D3610 connected to a host via a single SAS cable on DP-1 on Controller 1. Is the&nbsp; a way to connect Controller 2 to my host so that if Controller 1 failed, Controller 2 would take over? Everything I've seen on HPE's docs talks about redudnant paths when using multiple enclosures, but since I have the one, it's not really helping me. Any help or feedback would be appreciated. Thanks!</P> Fri, 01 Feb 2019 21:56:03 GMT https://community.hpe.com/t5/disk-enclosures/d3610-controller-redundancy/m-p/7033312#M48906 rbycek 2019-02-01T21:56:03Z https://community.hpe.com/t5/disk-enclosures/d3610-controller-redundancy/m-p/7035545#M48910 <P>Hello rbycek,</P><P>Thank you for your query. This query requires further investigation, so please create a support ticket with our Technical Support Team, so that we can test the setup and confirm if the desired setup is going to work for the server.</P> Thu, 21 Feb 2019 12:52:39 GMT https://community.hpe.com/t5/disk-enclosures/d3610-controller-redundancy/m-p/7035545#M48910 Pra_Sah 2019-02-21T12:52:39Z