https://community.hpe.com/t5/disk-enclosures/ca-xp512-dr/m-p/2730345#M4906 I believe you want to resume the pair, not create it.<BR /><BR />Good luck! Tue, 28 May 2002 22:33:01 GMT Vincent Fleming 2002-05-28T22:33:01Z https://community.hpe.com/t5/disk-enclosures/ca-xp512-dr/m-p/2730344#M4905 Hi,<BR /><BR />I am simulating a DR scenario.<BR /><BR />On the Remote site I am issuing the command<BR /><BR />pairsplit -g GROUP_NAME -R<BR /><BR />Which I understand should be used when the P-VOL is assumed to be dead due to a disaster.<BR /><BR />After the test has finished I will be issuing the command<BR /><BR />paircreate -g GROUP_NAME -vl -c15 CGID<BR />(where CGID is the Consistency Group)<BR /><BR />Do you agree with this or am I doing something wrong. Thu, 23 May 2002 13:58:39 GMT https://community.hpe.com/t5/disk-enclosures/ca-xp512-dr/m-p/2730344#M4905 CIS Unix (Keith Daley) 2002-05-23T13:58:39Z https://community.hpe.com/t5/disk-enclosures/ca-xp512-dr/m-p/2730345#M4906 I believe you want to resume the pair, not create it.<BR /><BR />Good luck! Tue, 28 May 2002 22:33:01 GMT https://community.hpe.com/t5/disk-enclosures/ca-xp512-dr/m-p/2730345#M4906 Vincent Fleming 2002-05-28T22:33:01Z