topic Re: HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage) in Disk Enclosures

HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage)

pzdroik — Thu, 04 Apr 2024 04:05:31 GMT

I've just rerceived a storage upgrade to my ProLiant DL380 Gen10 server: 5 x 20TB HDD. The new 20TB discs had been hot installed by a technician and I wanted to start building a new array, but I the controller, P816i-a, could detect only 1 new disc.

It seems the 3rd cage has a probkem or is not connected. I restarted the server remotely, but nothing changed.

The server is used by multiple projectw 24/day and finding a maintenance time window is not very easy.

Is there anythong I can do before stopping the provcessing and checking the cabling? It was never opened and it's the second storage upgrade - first time adding 2 new discs was sraightforward.

Is it possible, that the server was delivered without the 3rd cage connected to the controller?

here is the controller/server info:

root@gpu-falco:/home/pzdroik# dmidecode | grep -A8 '^System Information'

System Information

Manufacturer: HPE

Product Name: ProLiant DL380 Gen10

Version: Not Specified

Serial Number: T*******X

UUID: 3***...***8

Wake-up Type: Power Switch

SKU Number: P19718-B21

Family: ProLiant

root@gpu-falco:/home/pzdroik# ssacli ctrl slot=0 pd all show

HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)

Array A

physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 10 TB, OK)

physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS HDD, 10 TB, OK)

physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS HDD, 10 TB, OK)

physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS HDD, 10 TB, OK)

physicaldrive 2I:2:1 (port 2I:box 2:bay 1, SAS HDD, 10 TB, OK)

physicaldrive 2I:2:2 (port 2I:box 2:bay 2, SAS HDD, 10 TB, OK)

physicaldrive 2I:2:3 (port 2I:box 2:bay 3, SAS HDD, 10 TB, OK)

Unassigned

physicaldrive 2I:2:4 (port 2I:box 2:bay 4, SAS HDD, 20 TB, OK)

root@gpu-falco:/home/pzdroik# ssacli ctrl slot=0 enclosure all show

HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)

Internal Drive Cage at Port 1I, Box 1 (Index 0), OK

Internal Drive Cage at Port 2I, Box 2 (Index 1), OK

Re: HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage)

shuff — Mon, 16 Sep 2024 09:19:58 GMT

is all the firmware updated to the same version? maybe a good first step before additional debugging

Re: HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage)

ngnear — Mon, 16 Sep 2024 09:19:49 GMT

Hi,

Before you proceed to do any activity, make sure you have a valid data backup!

If it is an application server, I'd suggest to get the logs analyzed by logging an HPE Support ticket.

Anyways, can you share the firmware versions of the controller, BIOS and iLO?

Re: HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage)

pzdroik — Mon, 16 Sep 2024 09:20:15 GMT

@ngnear

This is what I found in the diag report regarding the versions:

[ HPE Smart Array P816i-a SR Gen10 in Embedded Slot ] → Identify Controller
Configured Logical Drives 1 (0x01)
Configuration Signature 0x02d2b8b1
RAM Firmware Revision 3.53
ROM Firmware Revision 3.53
Hardware Revision 0x00
Boot Block Revision 6.06
Drive Present Map 0x00000000
External Drive Map 0x00000000
Board ID 0x1100103c
Swapped Cable Flags 0x00
Non Disk Map 0x00000000
Bad Host RAM Addr 0x00
CPU Revision 0x20
PDPI Revision 0x00
EPIC Revision 0x00
WCXC Revision 0x00
Marketing Revision A
Controller Flags 0x8c

...

And this is probably the most relevant part of the diag report:

[ Top ] → [ HPE Smart Array P816i-a SR Gen10 in Embedded Slot ] → Backplane Discovery Protocol Current
Connector Count 0x04
Connector Struct Size 0x06
Connector Structure
Discovery Protocol Found Protocol Link Width Supports Clock Routing Reserved 1 Reserved 2
...
Connector Structure decoded per Port
Port Discovery Protocol Found Protocol Link Width Supports Clock Routing
1 UBM(I2C) with SAS/SATA fallback I2C HPE SmartCarrier Interface 0 0
2 UBM(I2C) with SAS/SATA fallback I2C HPE SmartCarrier Interface 0 0
3 UBM(I2C) with SAS/SATA fallback Not Connected 0 0
4 UBM(I2C) with SAS/SATA fallback Not Connected 0 0

Re: HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage)

pzdroik — Mon, 16 Sep 2024 09:20:52 GMT

The problem has been solved. The plug of the cable from the controller was not fully in the socket of the Box 3. It was enough to push it to get the "click" sound confirmirming the correct position of the plug.

After the "fix", all the drives were properly recognised:

root@gpu-falco:/home/pzdroik# ssacli ctrl slot=0 pd all show

HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)

Array A
physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS HDD, 10 TB, OK)
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS HDD, 10 TB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS HDD, 10 TB, OK)
physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS HDD, 10 TB, OK)
physicaldrive 2I:2:1 (port 2I:box 2:bay 1, SAS HDD, 10 TB, OK)
physicaldrive 2I:2:2 (port 2I:box 2:bay 2, SAS HDD, 10 TB, OK)
physicaldrive 2I:2:3 (port 2I:box 2:bay 3, SAS HDD, 10 TB, OK)

Array B
physicaldrive 2I:2:4 (port 2I:box 2:bay 4, SAS HDD, 20 TB, OK)
physicaldrive 3I:3:1 (port 3I:box 3:bay 1, SAS HDD, 20 TB, OK)
physicaldrive 3I:3:2 (port 3I:box 3:bay 2, SAS HDD, 20 TB, OK)
physicaldrive 3I:3:3 (port 3I:box 3:bay 3, SAS HDD, 20 TB, OK)
physicaldrive 3I:3:4 (port 3I:box 3:bay 4, SAS HDD, 20 TB, OK)

root@gpu-falco:/home/pzdroik# ssacli ctrl slot=0 enclosure all show

HPE Smart Array P816i-a SR Gen10 in Slot 0 (Embedded)
Internal Drive Cage at Port 1I, Box 1 (Index 0), OK
Internal Drive Cage at Port 2I, Box 2 (Index 1), OK
Internal Drive Cage at Port 3I, Box 3 (Index 2), OK

Re: HPE Smart Array P816i-a, missing 3rd enclosure (Internal Drive Cage)

Sunitha_Mod — Fri, 03 May 2024 09:01:26 GMT

Hello @pzdroik,

Awesome!

We are extremely glad to know the problem has been resolved and we appreciate you for keeping us posted.