topic Re: COMPONENT NAME: Enclosure 1, Controller B, Expander , Unknown in Disk Enclosures

COMPONENT NAME: Enclosure 1, Controller B, Expander , Unknown

Jijothn — Wed, 17 Jul 2024 00:41:46 GMT

Got an alert as below

Alert:

No drive enclosure is connected to this expansion port. This is normal if this is the last (or only) enclosure in the cabling sequence of the system.

- No Action Required.

CONTROLLER ID:# A

COMPONENT BASETYPE: sas_port

COMPONENT NAME: Enclosure 1, Controller B, Expander , Unknown

What should i do ?

Re: COMPONENT NAME: Enclosure 1, Controller B, Expander , Unknown

ArunKKR — Mon, 16 Sep 2024 09:20:23 GMT

Hi,

I believe that the alert is from either MSA 1060 or MSA 2060 array.

MSA 1060/2060 supports attaching additional disk enclosures to it.

The SAS expansion port on controllers is used to connect to additional disk enclosures.

If you do not have any additional disk enclosures attached to the MSA controller enclosure you could safely ignore this alert.

Re: COMPONENT NAME: Enclosure 1, Controller B, Expander , Unknown

ArunKKR — Fri, 26 Jul 2024 07:11:29 GMT

Hi , We wanted to follow up and check if the information shared addressed the issue. Request you to please respond with a Yes/No. You may also click on "Accept as a solution" button if the issue is resolved.