https://community.hpe.com/t5/disk-enclosures/hp-netraid-4m/m-p/2732517#M4936 Hi,<BR /><BR />Rebuild with a 4M is usually automatic because<BR />the card knows which disk is which one.<BR />I want to say that you can mix your ID disks<BR />in the cage, it will find its original config.<BR />For manual rebuild and infos, you will have<BR />to use Fast utility.<BR />Look at this link for infos.<BR /><BR /><A href="http://www.hp.com/cposupport/information_storage/support_doc/lpn10661.html" target="_blank">http://www.hp.com/cposupport/information_storage/support_doc/lpn10661.html</A><BR /><BR />Bye.<BR /><BR />Fab<BR /><BR /><BR /> Wed, 29 May 2002 14:41:05 GMT gruson 2002-05-29T14:41:05Z https://community.hpe.com/t5/disk-enclosures/hp-netraid-4m/m-p/2732516#M4935 Does anyone have links to sites that will go through the general procedure for recovering my RAID system if one of the disks goes down?<BR />Thanks,<BR />Donal Tue, 28 May 2002 10:51:00 GMT https://community.hpe.com/t5/disk-enclosures/hp-netraid-4m/m-p/2732516#M4935 Donal Morrissey 2002-05-28T10:51:00Z https://community.hpe.com/t5/disk-enclosures/hp-netraid-4m/m-p/2732517#M4936 Hi,<BR /><BR />Rebuild with a 4M is usually automatic because<BR />the card knows which disk is which one.<BR />I want to say that you can mix your ID disks<BR />in the cage, it will find its original config.<BR />For manual rebuild and infos, you will have<BR />to use Fast utility.<BR />Look at this link for infos.<BR /><BR /><A href="http://www.hp.com/cposupport/information_storage/support_doc/lpn10661.html" target="_blank">http://www.hp.com/cposupport/information_storage/support_doc/lpn10661.html</A><BR /><BR />Bye.<BR /><BR />Fab<BR /><BR /><BR /> Wed, 29 May 2002 14:41:05 GMT https://community.hpe.com/t5/disk-enclosures/hp-netraid-4m/m-p/2732517#M4936 gruson 2002-05-29T14:41:05Z