topic XP256 Command View Difficulty in Disk Enclosures https://community.hpe.com/t5/disk-enclosures/xp256-command-view-difficulty/m-p/2733267#M4959 Hi All<BR /><BR />I have a problem implementing Command View for XP256.<BR /><BR />The setup is 2 XP256s and a single XP512. The Command View management station is a Windows 2000 Advanced Server which runs Remote Control for XP256 and XP512 as well as CV.<BR /><BR />RC works fine for all arrays. CV works correctly on our XP512, but when I attempt to use Device Administration in CV to add the agent IP address for our XP256s (ie, the management station's own IP address) I get a "could not connect to agent" type error.<BR /><BR />I think I've followed the install instructions for CV correctly. I have the SNMP and SNMP Trap services running on the CV management station and they're configured with the appropriate community name and trap destination.<BR /><BR />Is there something that needs to be done on the SVP of the XP256?<BR /><BR />Thanks in advance<BR /><BR />Will Wed, 29 May 2002 09:11:00 GMT Will Hebden 2002-05-29T09:11:00Z XP256 Command View Difficulty https://community.hpe.com/t5/disk-enclosures/xp256-command-view-difficulty/m-p/2733267#M4959 Hi All<BR /><BR />I have a problem implementing Command View for XP256.<BR /><BR />The setup is 2 XP256s and a single XP512. The Command View management station is a Windows 2000 Advanced Server which runs Remote Control for XP256 and XP512 as well as CV.<BR /><BR />RC works fine for all arrays. CV works correctly on our XP512, but when I attempt to use Device Administration in CV to add the agent IP address for our XP256s (ie, the management station's own IP address) I get a "could not connect to agent" type error.<BR /><BR />I think I've followed the install instructions for CV correctly. I have the SNMP and SNMP Trap services running on the CV management station and they're configured with the appropriate community name and trap destination.<BR /><BR />Is there something that needs to be done on the SVP of the XP256?<BR /><BR />Thanks in advance<BR /><BR />Will Wed, 29 May 2002 09:11:00 GMT https://community.hpe.com/t5/disk-enclosures/xp256-command-view-difficulty/m-p/2733267#M4959 Will Hebden 2002-05-29T09:11:00Z