https://community.hpe.com/t5/disk-enclosures/configuring-smart-2sl-array-on-non-proliant-server/m-p/2748404#M5168 I have a Smart-2SL PCI controller from a Proliant 850R server, which is installed in a Compaq Deskpro EN PIII/450+ connected to an array enclosure with 3x WIde Ultra SCSI 9.1GB drives. NT4 has the drivers for the controller installed and running and the array presents itself as a 17GB volume (obviously raid 5). This works fine. <BR /> <BR />Windows ACU and diagnostics utilities are unable to detect the presence of an array or controller, v1.20 of the ACU can't find one either when booting (using SP6263). <BR /> <BR />I can put the card back into the 850 and configure it from there. But that is going to be a pain. <BR /> <BR />Anyone know a way of getting this all working? <BR /> <BR />Mark Wed, 19 Jun 2002 23:00:00 GMT Ayman Altounji 2002-06-19T23:00:00Z https://community.hpe.com/t5/disk-enclosures/configuring-smart-2sl-array-on-non-proliant-server/m-p/2748404#M5168 I have a Smart-2SL PCI controller from a Proliant 850R server, which is installed in a Compaq Deskpro EN PIII/450+ connected to an array enclosure with 3x WIde Ultra SCSI 9.1GB drives. NT4 has the drivers for the controller installed and running and the array presents itself as a 17GB volume (obviously raid 5). This works fine. <BR /> <BR />Windows ACU and diagnostics utilities are unable to detect the presence of an array or controller, v1.20 of the ACU can't find one either when booting (using SP6263). <BR /> <BR />I can put the card back into the 850 and configure it from there. But that is going to be a pain. <BR /> <BR />Anyone know a way of getting this all working? <BR /> <BR />Mark Wed, 19 Jun 2002 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/configuring-smart-2sl-array-on-non-proliant-server/m-p/2748404#M5168 Ayman Altounji 2002-06-19T23:00:00Z