https://community.hpe.com/t5/disk-enclosures/va7400-firmware-update-problem/m-p/2752189#M5241 Hi all,<BR /><BR />I'd like to upgrade the Firmware of the array controller (HP16).In the procedure, they tell me to turn the optimization policy off with this command : armmgr -o off <ARRAY_ID><BR /><BR />But the status of the array is "Optimization in progress, Disk scrubbing in progress". I do not understand what it stands for, 'cause I'm french...:)</ARRAY_ID> Wed, 26 Jun 2002 02:16:44 GMT GLESSINGER Laurent 2002-06-26T02:16:44Z https://community.hpe.com/t5/disk-enclosures/va7400-firmware-update-problem/m-p/2752189#M5241 Hi all,<BR /><BR />I'd like to upgrade the Firmware of the array controller (HP16).In the procedure, they tell me to turn the optimization policy off with this command : armmgr -o off <ARRAY_ID><BR /><BR />But the status of the array is "Optimization in progress, Disk scrubbing in progress". I do not understand what it stands for, 'cause I'm french...:)</ARRAY_ID> Wed, 26 Jun 2002 02:16:44 GMT https://community.hpe.com/t5/disk-enclosures/va7400-firmware-update-problem/m-p/2752189#M5241 GLESSINGER Laurent 2002-06-26T02:16:44Z https://community.hpe.com/t5/disk-enclosures/va7400-firmware-update-problem/m-p/2752190#M5242 When it's scrubbing the disks, it means that it is moving the data from RAID 1_0 to RAID5DP.<BR />That's a background process for optimizing storage capacity and performance.<BR /><BR />It should stop after a while when you didn't write any data to the array.<BR />You can stop scrubbing manually with the command armmgr -p disable <ARRAY-ID><BR /><BR />Good luck,<BR /><BR />Marco.</ARRAY-ID> Wed, 26 Jun 2002 06:38:19 GMT https://community.hpe.com/t5/disk-enclosures/va7400-firmware-update-problem/m-p/2752190#M5242 Marco Hogeveen 2002-06-26T06:38:19Z