https://community.hpe.com/t5/disk-enclosures/adding-a-hard-disk/m-p/2470399#M543 I have a smart array 4200 with one 18GB Hard Disk connected. On the NT system this HD has two logical drives, onde c: with 4.0GBytes and e: with 14GBytes. <BR />I will add another hard disk, also 18GBytes, to this smart array controller. I want that my logical drive e: expands adding this additional 18GBytes to it. <BR />So the final desired configuration would be: <BR /> <BR />C: 4.0GBytes <BR />E: 14 + 18 GBytes <BR /> <BR />Is that possible ? <BR /> <BR />Thanks in advance for any help. Tue, 05 Dec 2000 00:00:00 GMT Ayman Altounji 2000-12-05T00:00:00Z https://community.hpe.com/t5/disk-enclosures/adding-a-hard-disk/m-p/2470399#M543 I have a smart array 4200 with one 18GB Hard Disk connected. On the NT system this HD has two logical drives, onde c: with 4.0GBytes and e: with 14GBytes. <BR />I will add another hard disk, also 18GBytes, to this smart array controller. I want that my logical drive e: expands adding this additional 18GBytes to it. <BR />So the final desired configuration would be: <BR /> <BR />C: 4.0GBytes <BR />E: 14 + 18 GBytes <BR /> <BR />Is that possible ? <BR /> <BR />Thanks in advance for any help. Tue, 05 Dec 2000 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/adding-a-hard-disk/m-p/2470399#M543 Ayman Altounji 2000-12-05T00:00:00Z https://community.hpe.com/t5/disk-enclosures/adding-a-hard-disk/m-p/2470400#M544 Should not be an issue. The ACU should be able to do this, but if the firmware is old enough on that controller, you may have to go into Disk Administrator and create a "volume set" between the existing E: drive and the new "free space"... Wed, 20 Dec 2000 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/adding-a-hard-disk/m-p/2470400#M544 Ayman Altounji 2000-12-20T00:00:00Z