topic Re: VA7410 in Disk Enclosures

VA7410

Donovan Israel Murray — Wed, 17 Jul 2002 19:58:51 GMT

Hello:

Is it possible to turn of the auto RAID feature on a 7410 and run say a RAID 1 configuration?

Also if anyone has any technical info at all on the VA7410 box and can post it that would be quite useful.

Thanks in advance.

Re: VA7410

Michael Tully — Wed, 17 Jul 2002 22:44:09 GMT

Unfortunately this array looks like it has just been released. I don't see that the config your after would be much different to that of the 7400. You could start at the below link.

http://www.hp.com/products1/storage/products/disk_arrays/midrange/index.html

Re: VA7410

Peter Mattei — Thu, 18 Jul 2002 16:06:13 GMT

From the management standpoint the VA7410 works just like the VA7400. This means that during inital setup you can choose if you want to run the array in either RAID01 or AutoRaid. (Afterwards you can go from RAID01 to AutoRaid but not vice versa)
The main differences between the VA7410 and the (VA7400) are:
- 4 (2 FC Ports)
VA7410 info can be found at http://www.hp.com/products1/storage/products/disk_arrays/midrange/va7410/index.html
Find attached two VA7410 slides I created to show the details.
Peter