https://community.hpe.com/t5/disk-enclosures/securelun-xp512/m-p/2777673#M5642 No host reboot is required. You will not be able to access any LUNs you didn't give access to immediately.<BR /><BR />Good luck!<BR /> Thu, 01 Aug 2002 16:39:17 GMT Vincent Fleming 2002-08-01T16:39:17Z https://community.hpe.com/t5/disk-enclosures/securelun-xp512/m-p/2777672#M5641 When enabling SecureLUN XP on a XP512, do I need to reboot the attached hosts in order for the LUN security to kick-in? In this case, I have two Solaris hosts attached. Everything is working fine after I made the change but I just want to be sure the Security is actually working.<BR /><BR />THX Thu, 01 Aug 2002 13:43:56 GMT https://community.hpe.com/t5/disk-enclosures/securelun-xp512/m-p/2777672#M5641 Joseph Vrankovic 2002-08-01T13:43:56Z https://community.hpe.com/t5/disk-enclosures/securelun-xp512/m-p/2777673#M5642 No host reboot is required. You will not be able to access any LUNs you didn't give access to immediately.<BR /><BR />Good luck!<BR /> Thu, 01 Aug 2002 16:39:17 GMT https://community.hpe.com/t5/disk-enclosures/securelun-xp512/m-p/2777673#M5642 Vincent Fleming 2002-08-01T16:39:17Z