https://community.hpe.com/t5/disk-enclosures/xp256-initial-setup-mode/m-p/2786324#M5778 <BR />Hi Tim,<BR /><BR />This password is HP (&amp; Hitachi) only, in fact working on the SVP is for HP engineers only. There's no need for the cu to use the SVP to (re)configure the XP.<BR /><BR />Please use CommandView or the Remote Control software to (re)configure.<BR /><BR />Best Regards.<BR />Mark van Silfhout Thu, 15 Aug 2002 09:27:05 GMT Mark van Silfhout 2002-08-15T09:27:05Z https://community.hpe.com/t5/disk-enclosures/xp256-initial-setup-mode/m-p/2786323#M5777 I have an XP256 system that was reconfigured cold, contains no customer data.<BR />Does anyone know the initial setup mode password? (ctrl+shift+i)<BR />Thanks! Wed, 14 Aug 2002 18:10:36 GMT https://community.hpe.com/t5/disk-enclosures/xp256-initial-setup-mode/m-p/2786323#M5777 Tim Estes 2002-08-14T18:10:36Z https://community.hpe.com/t5/disk-enclosures/xp256-initial-setup-mode/m-p/2786324#M5778 <BR />Hi Tim,<BR /><BR />This password is HP (&amp; Hitachi) only, in fact working on the SVP is for HP engineers only. There's no need for the cu to use the SVP to (re)configure the XP.<BR /><BR />Please use CommandView or the Remote Control software to (re)configure.<BR /><BR />Best Regards.<BR />Mark van Silfhout Thu, 15 Aug 2002 09:27:05 GMT https://community.hpe.com/t5/disk-enclosures/xp256-initial-setup-mode/m-p/2786324#M5778 Mark van Silfhout 2002-08-15T09:27:05Z