https://community.hpe.com/t5/disk-enclosures/gridmgr-setup-mpe/m-p/2793439#M5914 Greetings! I've done all the configuration to see my Nike Model 20 via a DTC connection, but keep getting this error:<BR /><BR />Dale:gridmgr<BR /><BR />GridMgr/iX (A.01.01) (C) COPYRIGHT Hewlett-Packard Co. 1996<BR /><BR /> SUN, AUG 25, 2002, 10:58 AM<BR /><BR /><BR />There are 3 Grid Manager Disk Array Ldevs configured on this system.<BR /><BR />Their Ldev numbers are: <BR /><BR /> 203 204 205<BR /><BR />Which of these Disk Array Ldevs do you want to use? <BR />(You can select Ldev number zero to mean"none of them".)<BR />Ldev number? 204<BR /><BR />[MANAGER.PUB.SYS on Ldev #4]<BR /><BR />GridMgr: Nike Ldev = 204, User Ldev = 4<BR /><BR />************************************************************<BR />* When you are done and want to quit using Grid Manager, *<BR />* type either a Control-Y or a Control-K at any of the *<BR />* Grid Manager "Enter Choice" prompts for input. *<BR />************************************************************<BR /><BR />Type a Carriage Return when you are ready to proceed.<BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR />GridMgr ERROR detected, error code = ERR_NIKE_READ_ESC_TRANSLATION_ERROR<BR /><BR /> <BR />**** PROCESS QUIT; PARAM = 47 <BR />ABORT: GRIDMGR.PUB.SYS <BR />NM SYS a.00a9b4a0 dbg_abort_trace+$24<BR />NM PROG 661.0000e368 report_error_and_quit+$50<BR />Program terminated in an error state. (CIERR 976)<BR /><BR />Anyone have any ideas? The ports seem to be configured correctly. We're using 25M/F straight-thru cables, and we're using MPE 6.0 on a 969/200, and (unfortunately) OpenView DTC manager.<BR /><BR />Thanks in Advance!<BR /><BR />-dd Sun, 25 Aug 2002 16:57:41 GMT dan dobbs 2002-08-25T16:57:41Z https://community.hpe.com/t5/disk-enclosures/gridmgr-setup-mpe/m-p/2793439#M5914 Greetings! I've done all the configuration to see my Nike Model 20 via a DTC connection, but keep getting this error:<BR /><BR />Dale:gridmgr<BR /><BR />GridMgr/iX (A.01.01) (C) COPYRIGHT Hewlett-Packard Co. 1996<BR /><BR /> SUN, AUG 25, 2002, 10:58 AM<BR /><BR /><BR />There are 3 Grid Manager Disk Array Ldevs configured on this system.<BR /><BR />Their Ldev numbers are: <BR /><BR /> 203 204 205<BR /><BR />Which of these Disk Array Ldevs do you want to use? <BR />(You can select Ldev number zero to mean"none of them".)<BR />Ldev number? 204<BR /><BR />[MANAGER.PUB.SYS on Ldev #4]<BR /><BR />GridMgr: Nike Ldev = 204, User Ldev = 4<BR /><BR />************************************************************<BR />* When you are done and want to quit using Grid Manager, *<BR />* type either a Control-Y or a Control-K at any of the *<BR />* Grid Manager "Enter Choice" prompts for input. *<BR />************************************************************<BR /><BR />Type a Carriage Return when you are ready to proceed.<BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR /><BR />GridMgr ERROR detected, error code = ERR_NIKE_READ_ESC_TRANSLATION_ERROR<BR /><BR /> <BR />**** PROCESS QUIT; PARAM = 47 <BR />ABORT: GRIDMGR.PUB.SYS <BR />NM SYS a.00a9b4a0 dbg_abort_trace+$24<BR />NM PROG 661.0000e368 report_error_and_quit+$50<BR />Program terminated in an error state. (CIERR 976)<BR /><BR />Anyone have any ideas? The ports seem to be configured correctly. We're using 25M/F straight-thru cables, and we're using MPE 6.0 on a 969/200, and (unfortunately) OpenView DTC manager.<BR /><BR />Thanks in Advance!<BR /><BR />-dd Sun, 25 Aug 2002 16:57:41 GMT https://community.hpe.com/t5/disk-enclosures/gridmgr-setup-mpe/m-p/2793439#M5914 dan dobbs 2002-08-25T16:57:41Z