https://community.hpe.com/t5/disk-enclosures/fcarray-error-configuring-rs12fc/m-p/2802193#M6027 Hi,<BR /><BR />I have an existing config of an LXr 8500 with an Agilent HBA connected to an RS12FC. The OS is Win2K Advanced Server.<BR /><BR />The RAID config is 5 across eight disks with two hot spares. <BR /><BR />I'm trying to release one of the hot spares for use as a swap drive. Using the FCArray RAID Assistant I perform a Manual Configuration / Edit COnfiguration / Remove Spare. When I apply the changes (on the LUN Mapping tab) I get the following error:<BR /><BR />"Failed to save LUN mapping to controller. Do you want to continue to save the configuration." If you click Yes it fails with "Error in creating the new configuration".<BR /><BR />Any ideas?<BR /><BR /> Mon, 09 Sep 2002 09:23:38 GMT Richard Hutchings 2002-09-09T09:23:38Z https://community.hpe.com/t5/disk-enclosures/fcarray-error-configuring-rs12fc/m-p/2802193#M6027 Hi,<BR /><BR />I have an existing config of an LXr 8500 with an Agilent HBA connected to an RS12FC. The OS is Win2K Advanced Server.<BR /><BR />The RAID config is 5 across eight disks with two hot spares. <BR /><BR />I'm trying to release one of the hot spares for use as a swap drive. Using the FCArray RAID Assistant I perform a Manual Configuration / Edit COnfiguration / Remove Spare. When I apply the changes (on the LUN Mapping tab) I get the following error:<BR /><BR />"Failed to save LUN mapping to controller. Do you want to continue to save the configuration." If you click Yes it fails with "Error in creating the new configuration".<BR /><BR />Any ideas?<BR /><BR /> Mon, 09 Sep 2002 09:23:38 GMT https://community.hpe.com/t5/disk-enclosures/fcarray-error-configuring-rs12fc/m-p/2802193#M6027 Richard Hutchings 2002-09-09T09:23:38Z