topic VA Command View SDM only with read access possibe? in Disk Enclosures

VA Command View SDM only with read access possibe?

Hoffmann Marc — Wed, 18 Sep 2002 08:14:31 GMT

For a demo I need the VA command view SDM only with read access to show the VA7100 config. Is it possible to configure this only with read access and if it's possible how can I do this?

Thank you for your help!

Regards,
Marc

Re: VA Command View SDM only with read access possibe?

Vincent Fleming — Wed, 18 Sep 2002 15:09:29 GMT

Gruezi!

The current version of Command View SDM does not have multiple levels of security, so no, you can't do it in read-only mode.

If I recall, there is a demo mode (or used to be), but that would not show your configuration... just a sample one.

Tschau!

Re: VA Command View SDM only with read access possibe?

Roger_22 — Thu, 19 Sep 2002 22:19:58 GMT

Until a few days ago, you could download a working version of Command View sdm from hp.com. Contact your hp support team, they should be able to get you a copy.

Command View security is set by IP address. If your IP address is granted access then you have read/write permission.