https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811099#M6113 Also, I cant seam to get the Controller to boot of off a SCSI drive. it first boots of a IDE drive. <BR />P.S. i am using the Array controller in a NON-Compaq SERVER. Sun, 22 Sep 2002 23:00:01 GMT Ayman Altounji 2002-09-22T23:00:01Z https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811098#M6112 Can the Array Controller be configured to boot of off a Certain SCSI ID number, you can enter other manufactures SCSI Cards BIOS by Pressing CTRL/CRTL-A etc, what is the 3200 SMART Array Controllers bottns u need to press. Sun, 22 Sep 2002 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811098#M6112 Ayman Altounji 2002-09-22T23:00:00Z https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811099#M6113 Also, I cant seam to get the Controller to boot of off a SCSI drive. it first boots of a IDE drive. <BR />P.S. i am using the Array controller in a NON-Compaq SERVER. Sun, 22 Sep 2002 23:00:01 GMT https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811099#M6113 Ayman Altounji 2002-09-22T23:00:01Z https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811100#M6114 You need to be able to set the controller order on the server you have the SA installed in. Go into the server's bios configuration and look at setting the SA to boot first.<BR /><BR />Also, scsi IDs won't matter for booting once you configure the array. You will then be booting from a "logical drive" instead. Mon, 23 Sep 2002 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/scsi-bios/m-p/2811100#M6114 Ayman Altounji 2002-09-23T23:00:00Z