https://community.hpe.com/t5/disk-enclosures/fc10-array-new-archtecture/m-p/2844779#M6574 FC10 work in FC-AL only. Disk addresses can be changes with switch at the LCCs. Do not forget switches should be setup the same at both LCCs within one FC10. Number of AL-PAs occupied by FC10 is 12 (you can set them up using step 12: alpa=switch*12+slot#, for LCC alpa=switch*12+10, slot#=0..9). You can not connect both LCCs to one arbitrated loop because then you'll have alpa conflicts (same alpas seen from both LCCs)<BR />Please refer to user's manual for more/detailed info<BR />Eugeny Thu, 14 Nov 2002 12:47:03 GMT Eugeny Brychkov 2002-11-14T12:47:03Z https://community.hpe.com/t5/disk-enclosures/fc10-array-new-archtecture/m-p/2844778#M6573 I need to setup a new configuration for tow server that share 4 FC10.<BR />I need more information abouth capacity and connction for FC10..<BR />Can someone help me<BR />Thanks Thu, 14 Nov 2002 12:23:52 GMT https://community.hpe.com/t5/disk-enclosures/fc10-array-new-archtecture/m-p/2844778#M6573 malki_3 2002-11-14T12:23:52Z https://community.hpe.com/t5/disk-enclosures/fc10-array-new-archtecture/m-p/2844779#M6574 FC10 work in FC-AL only. Disk addresses can be changes with switch at the LCCs. Do not forget switches should be setup the same at both LCCs within one FC10. Number of AL-PAs occupied by FC10 is 12 (you can set them up using step 12: alpa=switch*12+slot#, for LCC alpa=switch*12+10, slot#=0..9). You can not connect both LCCs to one arbitrated loop because then you'll have alpa conflicts (same alpas seen from both LCCs)<BR />Please refer to user's manual for more/detailed info<BR />Eugeny Thu, 14 Nov 2002 12:47:03 GMT https://community.hpe.com/t5/disk-enclosures/fc10-array-new-archtecture/m-p/2844779#M6574 Eugeny Brychkov 2002-11-14T12:47:03Z