install without using assisted method

Ayman Altounji — Fri, 22 Dec 2000 00:00:00 GMT

when beginning install of nt i m requested if i want to install supplemental devices; i would like to know where are the drv for the smart431 (what SP number for drv)

Re: install without using assisted method

Ayman Altounji — Thu, 28 Dec 2000 00:00:00 GMT

1) Run SmartStart cd and choose option to create support software
choose option to create server support software for NT 4.0
make diskettes 2) scsi/array drivers and 4) nic drivers
2) Create the 3 NT install diskettes (if you boot from CD you need to hit f6 about evey 2 sec. when NT cd starts to load)
3) At the window that mentions mass storage detection, select S to skip mass storage detection.
4) At the next window, select S to specify mass storage device.
5) At the next window, select Other
6) Insert SSD diskette with scsi subdirectory ; (disk 2 currently)
7) Select "Compaq Integrated Smart Array Controllers" for 3200 controller or Select "Compaq Integrated Smart Array\42xx Controllers" for 431/integrated/4200
8) At the next window, select S to specify more mass storage devices
9) Select "Compaq 32 bit scsi controllers"
8) At the next window, select S to specify more mass storage devices
9) At the next window, hit the UP arrow and select IDE CD-ROM
10) Continue hitting S to specify mass storage devices until all scsi and array drivers are recognized
When you get to networking portion DO NOT CHOOSE DETECT CHOOSE SPECIFY put in disk 4
11) Proceed with rest of NT installation

Re: install without using assisted method

Ayman Altounji — Tue, 06 Feb 2001 00:00:00 GMT

The driver for the controller is contained in the
Compaq Server Support (SSD) for Microsoft Windows NT 4.0

topic Re: install without using assisted method in Disk Enclosures

install without using assisted method

Re: install without using assisted method

Re: install without using assisted method