https://community.hpe.com/t5/disk-enclosures/ra8000-swap-error/m-p/2887741#M7202 Has any one seen an error like this before ?<BR />SWAP:UNABLE TO CLEAR SWAP SIGNAL ON DEVICE PORT TWO (ALSO 5)ALL SWAP SIGNALS DISABLED. This happens when connected via serial cable. <BR /> Wed, 22 Jan 2003 11:44:35 GMT Bryan Morgan 2003-01-22T11:44:35Z https://community.hpe.com/t5/disk-enclosures/ra8000-swap-error/m-p/2887741#M7202 Has any one seen an error like this before ?<BR />SWAP:UNABLE TO CLEAR SWAP SIGNAL ON DEVICE PORT TWO (ALSO 5)ALL SWAP SIGNALS DISABLED. This happens when connected via serial cable. <BR /> Wed, 22 Jan 2003 11:44:35 GMT https://community.hpe.com/t5/disk-enclosures/ra8000-swap-error/m-p/2887741#M7202 Bryan Morgan 2003-01-22T11:44:35Z https://community.hpe.com/t5/disk-enclosures/ra8000-swap-error/m-p/2887742#M7203 Did you ever get an answer on this? I'm running into the same problem.<BR /><BR />Thank you,<BR />Elle Mon, 04 Aug 2003 14:46:33 GMT https://community.hpe.com/t5/disk-enclosures/ra8000-swap-error/m-p/2887742#M7203 Elle_4 2003-08-04T14:46:33Z