https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477695#M746 What - exactly - does that blue screen say (there should be an error code and usually a driver name)? Thu, 04 Jan 2001 00:00:00 GMT Ayman Altounji 2001-01-04T00:00:00Z https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477694#M745 I have a Smart Array 431 Controller in a DL580 and DL380, all running Windows NT. All are configured with mirrored 18GB Ultra3SCSI drives. The problem is a get a two line blue screen indicating loss of access to drives. This is a reoccurring problem on all six machines I have this setup on. I need help. Tue, 02 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477694#M745 Ayman Altounji 2001-01-02T00:00:00Z https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477695#M746 What - exactly - does that blue screen say (there should be an error code and usually a driver name)? Thu, 04 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477695#M746 Ayman Altounji 2001-01-04T00:00:00Z https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477696#M747 I had the same issue with my 431 on firmware version 1.02. I updated it to version 1.18 and have not had any issues so far. That is quite a jump from 1.02 to 1.18...I wonder how many bugs were fixed? Fri, 02 Mar 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/hardware-blue-screen/m-p/2477696#M747 Ayman Altounji 2001-03-02T00:00:00Z