https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478129#M763 If you're performing a manual installation, take a look on your smartstart CD - there is a windows help file in the cpqhlp directory titled NWPRENG.HLP (for english) Wed, 28 Mar 2001 00:00:00 GMT Ayman Altounji 2001-03-28T00:00:00Z https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478127#M761 I am installing NW 4.2 on a new Compaq server with a Smart-5302 Raid card in it. After loading the CPQRAID.HAM driver, I cannot still get it to see the array to create the SYS partition. I read something about needing to copy over some files to DOS parition during the install, but I cannot find that TID anymore. Does anybody know anything about this?? Wed, 03 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478127#M761 Ayman Altounji 2001-01-03T00:00:00Z https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478128#M762 Do it load and find the raid controller? Have you copied the raid disk into the nwupdate directory before installing netware? <BR /> <BR />Duncan Thu, 22 Feb 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478128#M762 Ayman Altounji 2001-02-22T00:00:00Z https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478129#M763 If you're performing a manual installation, take a look on your smartstart CD - there is a windows help file in the cpqhlp directory titled NWPRENG.HLP (for english) Wed, 28 Mar 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/netware-4-2-install/m-p/2478129#M763 Ayman Altounji 2001-03-28T00:00:00Z