https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937405#M7968 I have a problem with a compaq proliant PL 1600 server. It's a cluster and it has got a Raid Array 4000. When we try to install windows 2000 advanced server, the system cannot know the Array. I haven't got a driver for windows 2000 for the array controller.<BR /><BR />Thanks and excuse me for may bad English Thu, 27 Mar 2003 16:06:01 GMT Juan Carlos_4 2003-03-27T16:06:01Z https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937405#M7968 I have a problem with a compaq proliant PL 1600 server. It's a cluster and it has got a Raid Array 4000. When we try to install windows 2000 advanced server, the system cannot know the Array. I haven't got a driver for windows 2000 for the array controller.<BR /><BR />Thanks and excuse me for may bad English Thu, 27 Mar 2003 16:06:01 GMT https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937405#M7968 Juan Carlos_4 2003-03-27T16:06:01Z https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937406#M7969 Verify that the HBAs are supported by CPQ/HP, verify that the HBA driver is the most recent (5.20.0.32), and also verify fibre connectivity to the hub/switch, RA4000, and nodes. Tue, 08 Apr 2003 11:04:49 GMT https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937406#M7969 Mike_392 2003-04-08T11:04:49Z https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937407#M7970 The storage is not seen even after installing the latest Support Pack? Do you have good link lights on the Arbitrated loop? This would normally use the cpqfcalm.sys driver. Tue, 08 Apr 2003 16:31:28 GMT https://community.hpe.com/t5/disk-enclosures/problems-with-win-2000-and-raid-array-4000/m-p/2937407#M7970 Terry Hutchings 2003-04-08T16:31:28Z