https://community.hpe.com/t5/disk-enclosures/cr-3500-and-linux/m-p/2954008#M8207 Yes, you can configure the CR3500 controller through the serial port on the back of the box.<BR /><BR />Attach a Windows machine to it and copy the CR3500 folder from a SmartStart CD 5.50 or earlier to the local drive of that machine.<BR /><BR />Run the setup.exe from that folder - you can use the utility to setup and monitor your shared storage.<BR /><BR />Documentation should be in that folder as well.<BR /><BR />Cheers,<BR /><BR />Janine Fri, 18 Apr 2003 16:32:36 GMT Janine Bertolo 2003-04-18T16:32:36Z https://community.hpe.com/t5/disk-enclosures/cr-3500-and-linux/m-p/2954007#M8206 I have CL1850 cluster but there is no configuration utility available for shared CR 3500 storage.<BR />Can I configure it thru serial port at the back of the box? Are there any manuals about that? Thu, 17 Apr 2003 13:14:29 GMT https://community.hpe.com/t5/disk-enclosures/cr-3500-and-linux/m-p/2954007#M8206 MG_GM 2003-04-17T13:14:29Z https://community.hpe.com/t5/disk-enclosures/cr-3500-and-linux/m-p/2954008#M8207 Yes, you can configure the CR3500 controller through the serial port on the back of the box.<BR /><BR />Attach a Windows machine to it and copy the CR3500 folder from a SmartStart CD 5.50 or earlier to the local drive of that machine.<BR /><BR />Run the setup.exe from that folder - you can use the utility to setup and monitor your shared storage.<BR /><BR />Documentation should be in that folder as well.<BR /><BR />Cheers,<BR /><BR />Janine Fri, 18 Apr 2003 16:32:36 GMT https://community.hpe.com/t5/disk-enclosures/cr-3500-and-linux/m-p/2954008#M8207 Janine Bertolo 2003-04-18T16:32:36Z