https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480171#M830 It should be a simple procedure of removing the old and adding the new, your user manual should have instuctions on that, also you should not have to configure the array controller seeing it should start using the new memory on boot. to verify go into the acu (array config utility Mon, 08 Jan 2001 00:00:01 GMT Ayman Altounji 2001-01-08T00:00:01Z https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480170#M829 Just wanted to know if there any needed configuration to be done after the memory upgrade from 64 to 128 on the 5304. <BR />what is the small chip and do you think that I should install it or compaq technician? Mon, 08 Jan 2001 00:00:00 GMT https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480170#M829 Ayman Altounji 2001-01-08T00:00:00Z https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480171#M830 It should be a simple procedure of removing the old and adding the new, your user manual should have instuctions on that, also you should not have to configure the array controller seeing it should start using the new memory on boot. to verify go into the acu (array config utility Mon, 08 Jan 2001 00:00:01 GMT https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480171#M830 Ayman Altounji 2001-01-08T00:00:01Z https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480172#M831 Please reference the Smart 5300 User Guide ..... Tue, 03 Apr 2001 23:00:00 GMT https://community.hpe.com/t5/disk-enclosures/memory-upgrade/m-p/2480172#M831 Ayman Altounji 2001-04-03T23:00:00Z