https://community.hpe.com/t5/disk-enclosures/netraid/m-p/2480440#M840 The NetRAID card should do fine in DOS. It can be configured on boot by pressing <CTRL-M> when the BIOS is scanning that bus. Configure it there and you should be fine. It will fake out the OS and 'pretend' to be what-ever size you make it. You will lose and error reporting that windows drivers will allow, and I think that DOS has a 2 gig drive size limitation so your logical drive size shouldn't be more than that. Play with it, have fun.<BR /><BR />Hope this helps,<BR />Chris</CTRL-M> Thu, 18 Jan 2001 00:20:24 GMT Christopher Smith_2 2001-01-18T00:20:24Z https://community.hpe.com/t5/disk-enclosures/netraid/m-p/2480439#M839 Can I configure and use NetRaid in MS-DOS ?<BR />I need create a boot disk. Mon, 08 Jan 2001 16:33:52 GMT https://community.hpe.com/t5/disk-enclosures/netraid/m-p/2480439#M839 X_2 2001-01-08T16:33:52Z https://community.hpe.com/t5/disk-enclosures/netraid/m-p/2480440#M840 The NetRAID card should do fine in DOS. It can be configured on boot by pressing <CTRL-M> when the BIOS is scanning that bus. Configure it there and you should be fine. It will fake out the OS and 'pretend' to be what-ever size you make it. You will lose and error reporting that windows drivers will allow, and I think that DOS has a 2 gig drive size limitation so your logical drive size shouldn't be more than that. Play with it, have fun.<BR /><BR />Hope this helps,<BR />Chris</CTRL-M> Thu, 18 Jan 2001 00:20:24 GMT https://community.hpe.com/t5/disk-enclosures/netraid/m-p/2480440#M840 Christopher Smith_2 2001-01-18T00:20:24Z